removing separate project for lack of chips and switching to dev boards. copied out the schematics used.

Schematic ERC is done and DRC for current layout is done. Need to verify a new part of the circuit before routing the rest of the board.

cleared all of the ERC stuff need to go over some of the power stuff for this before finishing routing.

fixing the 5V lines and removing the 5V fromt he MCU board and only using the 3Amp 5v power supplied by CampKeen

I think everything is placed on the board special routes have been done. need to finish routing everything else.

fixed the schematics for the RTC, IO and COMs. Realigned the RTD to screw term. need to finish the 3.3v portion of the power systems.

still fixing the schematic the coms/RTC need to assign footprints and double check all the parts in that file.